Battery Enclosures

Displaying 1 - 2 of 2 Categories:

Outback Battery Enclosures Quality Solar Concepts sells the Outback PSR battery enclosure. The Outback PSR battery enclosure is a safe way to store batteries. The PSR battery enclosure concepts can store power inverters and more. The Outback PSR battery enclosure is built with quality corrosion resistant steel. The quality Outback battery enclosure cabinet can be assembled with more shelves for more batteries. The Outback PSR battery enclosure cabinet has front mounted bracket is provided to allow the installation of an inverter/battery disconnect breaker, two PV array disconnects and a two pole PV ground fault protection system Optional Components: PSR-SK - Additional shelf kit for use with more batteries or components One OBDC-100, 175 or 250 DC breakers for disconnecting the inverter/battery system OBDC-60 - PV array disconnect 60 amp DC OBDC-GFP/2 - Dual circuit 60 amp PV ground fault protection system for one or two PV controllers (only one OBDC-GFP/2 fits) OBDC15 and OBDC-30 breakers for DC loads Comes in three boxes PSR-SZ4 - Seismic zone 4 Kit to meet UBC earthquake safety requirements PSR-SCT - Spill Containment Tray for one shelf – holds up to four Group 31, T105 or L16 batteries or one 8D battery Molded Green Polyethylene plastic PSR-HDT - Heavy Duty Top for mounting an SW series inverter directly on top of a PSR cabinet – indoor use only PSR-BCK – Breaker cover kit for PSR only PSR-MP - Mounting plate for components such as inverters or PV charge controllers

Sunwize Battery Enclosures Sunwize Battery Enclosures Hinged Cover Battery Enclosures SunWize premium F-series hinged cover enclosures are engineered specifically for the PV industry allowing the installer to add controllers and other electrical components. Additional back, side and door panels are available. Sunwize Battery Enclosures are designed for outdoor use, NEMA type 3R/12 construction, enclosures have bottom-to-top rain and dust proof vent design. A removable front opening door is lined with a sealing gasket and includes a special keyed cam-lock and dust cover. These Sunwize enclosures are white powder coated aluminum for ultimate protection in severe climates. For applications in extreme hot or cold conditions, space is available for additional 1” foam insulation around the battery. Features: • 3 models for either 1, 2 or 4 batteries (125 Ah) • Vertical design on 4 battery enclosure (2 + 2) with removable interior shelf • Passive venting with dust filtration pads • 1/4 turn cam-locking door latches with special key and dust cover • Electrical knockouts and ground lug hole on rear • Rear-top of enclosure ‘hanger’ built in for easy installation onto mounting brackets • Vandal resistant mounting brackets and U-bolt sets are sold separately Economy Sunwize Battery Enclosures Available in five sizes, E-series economy battery enclosures are cost-effective solutions for housing one to four batteries. These enclosures feature aluminum screw covers, NEMA 3R type rainproof, vented construction, and an attractive brushed grain finish with rear 1/2” electrical knockouts. They include a removable back panel for mounting PV controls and other components (except E1-19 size). The two small enclosures, have two external mounting feet sized for 2” pipe U-bolt attachment. The three large enclosures, for housing 1, 2 or 4 (up to 126 Ah) batteries, include a door lock-hasp and rear wall/pole mounting bracket holes. Brackets sold separately. Extra space is provided in all to allow for 1” foam insulation around the battery. Tamper proof door screws can be added for extra security. Top Opening Sunwize Battery Enclosures Exterior white powder coated finish; T-series battery enclosures are designed for housing larger group 4D (250 Ah) & 8D (300 Ah) batteries and will house many other battery sizes as well. These enclosures feature 0.125” aluminum, NEMA 3R type rainproof-vented construction and include 3” x 5” channel skids with pad anchoring holes to provide ground clearance for a fork lift. The continuous ST-ST hinged cover includes a prop rod, lock hasp and 1/2” side conduit entries. All have interior mounting panel studs on sides and top cover for additional PV control & component mounting - panels are sold separately. Extra space is allowed for 2” foam insulation around the battery and under top cover - add ‘F’ suffix to model number for foam insulation installed.

Page: 1